#51 Re: Upgrading the Renegade
Posted: Sun, 19 Feb 17, 05:55 am
After building and shipping fin jigs all week, tonight I was caught up and needed a change of pace. So after having a great dinner at Huck's Catfish in Denison with my bride, I decided to see what I could screw up with the Renegade.
I trimmed the excess plastic with sharpened scissors and my Exacto knife...somewhat difficult because of the clear plastic, bad lighting and worse eyesight. But it fits the profile of the NC60 nose quite well. I may have trimmed a bit too much along the compound curves but I think all will work out with a bit of fine grit sandpaper and feathering.
I'll keep you posted on my progress once Doctor Ooze has finished carving on my bladder.
I trimmed the excess plastic with sharpened scissors and my Exacto knife...somewhat difficult because of the clear plastic, bad lighting and worse eyesight. But it fits the profile of the NC60 nose quite well. I may have trimmed a bit too much along the compound curves but I think all will work out with a bit of fine grit sandpaper and feathering.
I'll keep you posted on my progress once Doctor Ooze has finished carving on my bladder.