Cantina Conest concerning...

For those who are content to get the same thrill (without the extra cost) of the High Power Peple
Post Reply
User avatar
Commander
Space Captain
Space Captain
Posts: 790
Joined: Wed, 30 Mar 16, 01:49 am
Location: On the Starport

#1 Cantina Conest concerning...

Post by Commander »

...Shock Cords.

I am certain we are all familiar with the rubber shock cords Estes uses in their kits. I just replaced two of them, One in my Photon Disruptor and one in my Photon Probe. The rubber (or whatever material it is) had degraded near the knots connecting the shock cord to the nose cone and also at the knot attaching the cord to the Kevlar leader I had added to both rockets. The main line was still strong, but within an inch of both ends the cord would snap if a medium force tug was applied. I don't have any tension measuring devices or I would be more specific, but feel the tug was a lot less than most of the power kicks from the ejection charges. As I was replacing them, I wondered what I could use the old cords for since they were not suitable for use in rocketry and I have a large pile of them now since I don't use the supplied ones anymore.

Soooo....

Let's have a contest :!: The person who comes up with the best use of these Estes Shock Cords wins a T- Shirt :!: Winner shall be chosen by me on November 15, 2016 from all ideas posted in this thread. All decisions final; winning entry shall be based on originality and utility of idea.

Good Luck
Commander
Starport Sagitta
NAR No.97971
dhbarr
Space Cadet
Space Cadet
Posts: 2
Joined: Sun, 09 Oct 16, 09:53 am

#2 Re: Cantina Conest concerning...

Post by dhbarr »

Use a peg loom to weave them into trivets.
User avatar
Commander
Space Captain
Space Captain
Posts: 790
Joined: Wed, 30 Mar 16, 01:49 am
Location: On the Starport

#3 Re: Cantina Conest concerning...

Post by Commander »

I guess I gave to much ingenuity to those model rocketeers out there. Either that or everyone hates these things soooooo.... much :twisted: that re-purposing them is anathema to the cause.
Commander
Starport Sagitta
NAR No.97971
User avatar
luke strawwalker
Space Admiral
Space Admiral
Posts: 1547
Joined: Thu, 07 Apr 16, 04:45 am

#4 Re: Cantina Conest concerning...

Post by luke strawwalker »

I just toss them as soon as I open the kit bag... sometimes measure them first, multiply by three, and then cut a length of 1/4 inch elastic to replace them in the build...

Other than that IMHO they're pretty much worthless...

Later! OL J R :)
My MUNIFICENCE is BOUNDLESS, Mr. Bond...
tmacklin
Space Ensign
Space Ensign
Posts: 287
Joined: Sat, 09 Apr 16, 11:56 am

#5 Re: Cantina Conest concerning...

Post by tmacklin »

You could make some real nice "Russian Harps" with them.
User avatar
Joe Wooten
Space Lieutenant
Space Lieutenant
Posts: 407
Joined: Wed, 06 Apr 16, 13:26 pm

#6 Re: Cantina Conest concerning...

Post by Joe Wooten »

Cat toy hangers.......
User avatar
Commander
Space Captain
Space Captain
Posts: 790
Joined: Wed, 30 Mar 16, 01:49 am
Location: On the Starport

#7 Re: Cantina Conest concerning...

Post by Commander »

This contest ends tonight at midnight!

Any last minute ideas?
Commander
Starport Sagitta
NAR No.97971
User avatar
Joe Wooten
Space Lieutenant
Space Lieutenant
Posts: 407
Joined: Wed, 06 Apr 16, 13:26 pm

#8 Re: Cantina Conest concerning...

Post by Joe Wooten »

Too late.....

Rubber band gun power source
User avatar
Commander
Space Captain
Space Captain
Posts: 790
Joined: Wed, 30 Mar 16, 01:49 am
Location: On the Starport

#9 Re: Cantina Conest concerning...

Post by Commander »

:!: And we have a Winner :!:

Here Kitty , kitty :mrgreen:

Yes, Cat Toy is the best idea in my opinion.

I was intrigued by the trivet idea, but it appeared to have some drawbacks in that the cordage would melt upon application of a hot pan.
Commander
Starport Sagitta
NAR No.97971
User avatar
Joe Wooten
Space Lieutenant
Space Lieutenant
Posts: 407
Joined: Wed, 06 Apr 16, 13:26 pm

#10 Re: Cantina Conest concerning...

Post by Joe Wooten »

Commander wrote::!: And we have a Winner :!:

Here Kitty , kitty :mrgreen:

Yes, Cat Toy is the best idea in my opinion.

I was intrigued by the trivet idea, but it appeared to have some drawbacks in that the cordage would melt upon application of a hot pan.
I used one a couple of years ago to hang a catnip mouse. it took about 30 minutes for the furball to finally chew through it and take the mouse off....
Post Reply