SemRoc Estes Midget
#11 Re: SemRoc Estes Midget
Closer.... Closer...
Airbrushed the white using Brodak Insignia White.
Airbrushed the white using Brodak Insignia White.
Commander
Starport Sagitta
NAR No.97971
Starport Sagitta
NAR No.97971
- Trident
- Space Chief Petty officer
- Posts: 123
- Joined: Wed, 30 Mar 16, 16:02 pm
- Location: Fort Collins, CO
#12 Re: SemRoc Estes Midget
Looks smooooth! How do you like the Brodak dopes? I hear the sanding sealer is amazing. When I run out of my Deft Lacquer Sanding Sealer, I'll try it. May have to try the dope colors also. I'm dying to try my airbrush again.
Lee
Bulds: Estes Saturn V, Super Sky Hook, Farside-X
Awaiting Paint/Detailing: Estes Saturn 1B
Completed!: Der Saturn Max, Bandit XL
Bulds: Estes Saturn V, Super Sky Hook, Farside-X
Awaiting Paint/Detailing: Estes Saturn 1B
Completed!: Der Saturn Max, Bandit XL
#13 Re: SemRoc Estes Midget
As mentioned in Post #6, I have nose cones down quickly and easily with the Brodak Sanding Sealer. This entails dipping the nose cone down to just into the shoulder line into a pint size can of the Brodak Sanding Sealer. I then pull it out and hold it above the can can till the sealer dripping off it takes about 45-60 seconds between drips (usually about 4-5 minutes depending on the size of the cone). I then flip the cone nose up and set it aside to dry. a light sanding follows. I then repeat two more times and typically the cone is as smooth as a baby's bottom. I also shoot a coat of primer which typically is more likely to be a coat of either flat white or flat black generic paint from Walmart.Trident wrote:Looks smooooth! How do you like the Brodak dopes? I hear the sanding sealer is amazing. When I run out of my Deft Lacquer Sanding Sealer, I'll try it. May have to try the dope colors also. I'm dying to try my airbrush again.
Not that I'm not happy with the sanding sealer for the fins, but generally I am always experimenting with different techniques for filling the fins. On the midget I did brush on 4 coats of the sealer, but then I used two coats of the sandable filler primer from Rustoleum. I than covered one gain hollow which would not fill with the Bondo Spot Putty, another coat of filler primer, a coat of Krylon silver a cooat of filler primer; two coats of flat white and two coats of the Insignia White.
I keep feeling like I must be doing something wrong with the sanding sealer or I am just way more finnicky than some.
Commander
Starport Sagitta
NAR No.97971
Starport Sagitta
NAR No.97971
#14 Re: SemRoc Estes Midget
Second color added today. She just needs a fine sand, decals and gloss coat. Then it's time to fly.
The blue is Brodak's Caribbean Turquoise which I think needs a bit more blue to be an exact match to the 1973 catalog.
link Of course I really didn't feel the need to match it exactly at this time, especially seeing as I am having fun trying to get a paint mixture where it isn't drying half way to the model. Brodak has a retarder, I may have to break down and buy some to try it out.
The blue is Brodak's Caribbean Turquoise which I think needs a bit more blue to be an exact match to the 1973 catalog.
link Of course I really didn't feel the need to match it exactly at this time, especially seeing as I am having fun trying to get a paint mixture where it isn't drying half way to the model. Brodak has a retarder, I may have to break down and buy some to try it out.
Commander
Starport Sagitta
NAR No.97971
Starport Sagitta
NAR No.97971
#15 Re: SemRoc Estes Midget
Did a little touch up work with one of my smaller airbrushes. I must say it is nice to be able to go in and recolor a dot from a sandthrough without having to mask up the whole thing.
Gloss coat and stickers this weekend and my quickie build will be finished almost three months after starting it.
Gloss coat and stickers this weekend and my quickie build will be finished almost three months after starting it.
Commander
Starport Sagitta
NAR No.97971
Starport Sagitta
NAR No.97971
#16 Re: SemRoc Estes Midget
Nearly finished, a little early for the glam shot, but...
Not as detailed a build thread as I would like, but as I mentioned previously, this was supposed to be a "speed build" to get me through a building slump (actually a finishing slump, as I have numerous projects in some sort of progress).
I'm not overly happy with Carl's decision to keep it fitted for the shorty engines and the stop gap measure to fit a mini engine, but short of producing shorty engines, I have no way safety code acceptable way to maintain the nostalgia involved with rockets designed for the engines.
Just needs a final gloss coat to seal and protect the decals, then we can call this one done.Not as detailed a build thread as I would like, but as I mentioned previously, this was supposed to be a "speed build" to get me through a building slump (actually a finishing slump, as I have numerous projects in some sort of progress).
I'm not overly happy with Carl's decision to keep it fitted for the shorty engines and the stop gap measure to fit a mini engine, but short of producing shorty engines, I have no way safety code acceptable way to maintain the nostalgia involved with rockets designed for the engines.
Commander
Starport Sagitta
NAR No.97971
Starport Sagitta
NAR No.97971
- Joe Wooten
- Space Lieutenant
- Posts: 407
- Joined: Wed, 06 Apr 16, 13:26 pm
#17 Re: SemRoc Estes Midget
Safety code acceptable...... it's easy to cut off A8/B6-0 boosters and A8-5's to fit in this Midget. The NAR does not have 24/7 monitors on all members.Commander wrote:I'm not overly happy with Carl's decision to keep it fitted for the shorty engines and the stop gap measure to fit a mini engine, but short of producing shorty engines, I have no way safety code acceptable way to maintain the nostalgia involved with rockets designed for the engines.
#18 Re: SemRoc Estes Midget
After all these years you expect me to go rogue? Manufactured engines are an absolute, no adaptations or fiddling allowed.
Commander
Starport Sagitta
NAR No.97971
Starport Sagitta
NAR No.97971
- luke strawwalker
- Space Admiral
- Posts: 1545
- Joined: Thu, 07 Apr 16, 04:45 am
#19 Re: SemRoc Estes Midget
Later! OL J RCommander wrote:After all these years you expect me to go rogue? Manufactured engines are an absolute, no adaptations or fiddling allowed.
My MUNIFICENCE is BOUNDLESS, Mr. Bond...
- Joe Wooten
- Space Lieutenant
- Posts: 407
- Joined: Wed, 06 Apr 16, 13:26 pm
#20 Re: SemRoc Estes Midget
luke strawwalker wrote:giveyourselftothedarkside.jpgCommander wrote:After all these years you expect me to go rogue? Manufactured engines are an absolute, no adaptations or fiddling allowed.
Later! OL J R
We have cookies........