Lathe Work
#1 Lathe Work
So when I acquired my woodworking lathe, I could never acquire the skill to turn nose cones precisely repeatedly, so last month I got a duplicator for the tabletop lathe. I put it together and attached it, then took a couple of pracice turns. Not that my skill is any better, but I did notice some issues mainly dealing with the fact the duplicator made the lathe top heavy.
So in true Starport fashion, rather than take the easy way out, I decided to make a new bench just for the lathe. The lathe itself doesn't seem to have any accommodations for securing it to the bench top, so I bought some angle braces and decided to drill some holes into the lathe and the bench. While the bench I was using may have been adequate, I felt I could make something more utile for all the lathe needs. Having watched a lot of Paul Sellers woodworking videos on YouTube, I decided to build my bench based on his "poor man's work bench", which as an aside while being inexpensive (using mostly 2" x 4"s) is actually a very sturdy and adaptable woodworking bench. part 1 video
Well I have the laminated bench top almost complete, so by January I figure it will be ready for me.
All the shavings seen (and more) are from the benchtop and not from any lathe turning.
So in true Starport fashion, rather than take the easy way out, I decided to make a new bench just for the lathe. The lathe itself doesn't seem to have any accommodations for securing it to the bench top, so I bought some angle braces and decided to drill some holes into the lathe and the bench. While the bench I was using may have been adequate, I felt I could make something more utile for all the lathe needs. Having watched a lot of Paul Sellers woodworking videos on YouTube, I decided to build my bench based on his "poor man's work bench", which as an aside while being inexpensive (using mostly 2" x 4"s) is actually a very sturdy and adaptable woodworking bench. part 1 video
Well I have the laminated bench top almost complete, so by January I figure it will be ready for me.
All the shavings seen (and more) are from the benchtop and not from any lathe turning.
Commander
Starport Sagitta
NAR No.97971
Starport Sagitta
NAR No.97971
- luke strawwalker
- Space Admiral
- Posts: 1545
- Joined: Thu, 07 Apr 16, 04:45 am
- Trident
- Space Chief Petty officer
- Posts: 123
- Joined: Wed, 30 Mar 16, 16:02 pm
- Location: Fort Collins, CO
#3 Re: Lathe Work
I've only done really nice nose cones with a chuck, and most recently, a collet chuck. I add a dowel to the turning block, and insert it into the same size collet. Then the nose cone can be removed, and reinserted, with no concern regarding registration. Here is an upscale of a nose cone from the old Estes Saros rocket. It is my oldest in my fleet, built in 1976.
Lee
Bulds: Estes Saturn V, Super Sky Hook, Farside-X
Awaiting Paint/Detailing: Estes Saturn 1B
Completed!: Der Saturn Max, Bandit XL
Bulds: Estes Saturn V, Super Sky Hook, Farside-X
Awaiting Paint/Detailing: Estes Saturn 1B
Completed!: Der Saturn Max, Bandit XL
- bernomatic
- Site Admin
- Posts: 1169
- Joined: Tue, 29 Mar 16, 03:55 am
- Location: Cleveland, Ohio
- Contact:
#4 Re: Lathe Work
Looks great Lee, can I get you to turn about a hundred for the Sagitta Bolt that way?
Chief Cook -n- bottle washer
- luke strawwalker
- Space Admiral
- Posts: 1545
- Joined: Thu, 07 Apr 16, 04:45 am
- Trident
- Space Chief Petty officer
- Posts: 123
- Joined: Wed, 30 Mar 16, 16:02 pm
- Location: Fort Collins, CO
#6 Re: Lathe Work
Bernie, love you like a brother, but that's not exactly how I wanted to spend my retirement! Anyway, not sure I could make that many before I join the rocket gods up in the sky ...bernomatic wrote:Looks great Lee, can I get you to turn about a hundred for the Sagitta Bolt that way?
Lee
Bulds: Estes Saturn V, Super Sky Hook, Farside-X
Awaiting Paint/Detailing: Estes Saturn 1B
Completed!: Der Saturn Max, Bandit XL
Bulds: Estes Saturn V, Super Sky Hook, Farside-X
Awaiting Paint/Detailing: Estes Saturn 1B
Completed!: Der Saturn Max, Bandit XL
#7 Re: Lathe Work
That's an insect series nose cone (13mm BT). Seeing as it took me about an hour, somethings are going to have to change if I am to start making kits.
One thing that is changing is that I've ordered a Nova G3 chuck and a mini spigot jaw set. I'm sure they will be a vast improvement over my current chuck.
Commander
Starport Sagitta
NAR No.97971
Starport Sagitta
NAR No.97971
- Trident
- Space Chief Petty officer
- Posts: 123
- Joined: Wed, 30 Mar 16, 16:02 pm
- Location: Fort Collins, CO
#8 Re: Lathe Work
I have the Nova G3, as well as the cheaper one (Precision Midi). Great chucks. I have more jaw sets than I'll ever use, too, but bought them on sale. I think you'll be happy with the G3.
Lee
Bulds: Estes Saturn V, Super Sky Hook, Farside-X
Awaiting Paint/Detailing: Estes Saturn 1B
Completed!: Der Saturn Max, Bandit XL
Bulds: Estes Saturn V, Super Sky Hook, Farside-X
Awaiting Paint/Detailing: Estes Saturn 1B
Completed!: Der Saturn Max, Bandit XL
#9 Re: Lathe Work
I wonder why it is that you can't get a specific jaw set when purchasing the main chuck? I probably will never use the standard jaws that come with the chuck, and have to order the ones I will.
Commander
Starport Sagitta
NAR No.97971
Starport Sagitta
NAR No.97971
- Trident
- Space Chief Petty officer
- Posts: 123
- Joined: Wed, 30 Mar 16, 16:02 pm
- Location: Fort Collins, CO
#10 Re: Lathe Work
Yeah, I do not use them that much. And when I bought the Midi Precision, it came with the same jaw set. It would be nice if they just were sold with no jaws, but I bought both of them on sale, so its not a huge concern.Commander wrote:I wonder why it is that you can't get a specific jaw set when purchasing the main chuck? I probably will never use the standard jaws that come with the chuck, and have to order the ones I will.
If you ever get the Beall collet chuck, it comes with a selection of collets. Beall sells "fill-in" sizes so you have every conceivable range to clamp anything. But you can buy add-on collets from LittleMachineShop.com lots cheaper. As I recall, these are ER-32 collets. If youve ever considered a metal lathe or milling machine, check out this site. Really nice stuff!
Lee
Bulds: Estes Saturn V, Super Sky Hook, Farside-X
Awaiting Paint/Detailing: Estes Saturn 1B
Completed!: Der Saturn Max, Bandit XL
Bulds: Estes Saturn V, Super Sky Hook, Farside-X
Awaiting Paint/Detailing: Estes Saturn 1B
Completed!: Der Saturn Max, Bandit XL